News

How to maintain and maintain the pipe bender

Date:2021-10-30 15:39:47

1. When cleaning the oil tank of the pipe bender, the inlet oil filter of each pump should be cleaned.  

2. Clean the oil tank and filter the hydraulic box within 1-2 months after the equipment is used. 

3, if the forward and retreat backcutting failure is found, first check whether the solenoid valve action, such as the solenoid valve normal action, and then check the sequence valve 6X3, overflow valve YF - L20H4 or one-way unloading valve 4HD3 whether impurities stuck phenomenon.  (This phenomenon usually occurs when the equipment is in use).  If there is a stuck phenomenon, disassemble with gasoline or diesel cleaning, reinstall can be.  

4, hydraulic pump station joints are equipped with oil resistant rubber seal ring, such as seal ring damage, oil leakage, should be replaced in time.  5. Check the fasteners in all parts to make them in tight state.  

Next:Nothing
Contact

Shenglida Technology (Zhangjiagang) Co., Ltd.
Address: Nanfeng Economic Development Zone, Zhangjiagang City, Jiangsu Province
Contact: Manager Ma
Mobile: 86 15861482069      

             86 15262327286

 
Navigation
 
   
 
 
 
 
 
微信咨询
 
 
 
 
Contact
 
 
Contact: Manager Ma
Mob:15861482069
E-mail:sldkj0920@gmail.com
Add:Nanfeng Economic Development Zone, Zhangjiagang City, Jiangsu Province
Shenglida Technology (Zhangjiagang) Co.,Ltd. 苏ICP备2021049290号-1